If the brushing is slow, increase the outer speed increasing the brush diameter or your machine speed but never exceed the MSFS range. Use a smaller length of useful strand.
Use a brush with a greater wire diameter.
If the brushing is too aggressive, reduce the outer speed reducing the brush diameter or your machine speed.
Use a brush with longer useful strand.
Use a brush with smaller wire gauge.
Outer recommended speeds:
Burr removal 27 to 38 m/s
Welding cleaning 16 to 47 m/s
Incrustation cleaning 38 to 50 m/s
Surface polishing 40 to 50 m/s
FOR YOUR SAFETY
Pay attention to the speed restriction indicated in the brushes, containers and catalogues.
MSFS is not a working speed, it is the maximum safe speed in free rotation. It must never be exceeded.
Use a face and body protection equipment. Your eyes must always be protected.
To guarantee the operation security it is essential to use the correct axis diameter for the brush assembly and the adequate power in order to keep a constant speed.
Inspect the brush when you take it out from the packaging. Do not use it if it has distortions.
